Discussion:
USMT-Replace an Existing Computer with a New Computer Using LTI
(too old to reply)
shon
2008-11-13 23:02:31 UTC
Permalink
I'm using this scenario in a virtual environment but keep getting the
following error in the ZTIUserState log on the Client:

<![LOG[About to run command: msiexec.exe /i
"\\SERVER1\Distribution$\Tools\X86\InstallUSMT301_X86.msi" /quiet /passive
/norestart /L*v %TEMP%\USMT301.log]LOG]!><time="17:54:01.000+000"
date="11-13-2008" component="ZTIUserState" context="" type="1" thread=""
file="ZTIUserState">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIUserState: The system
cannot find the file specified.
(-2147024894 0x80070002)]LOG]!><time="17:54:01.000+000" date="11-13-2008"
component="ZTIUserState" context="" type="3" thread="" file="ZTIUserState">

This is the CustomsSettings.ini file I'm using:

[Settings]
Priority=Default
Properties=MyCustomProperty

[Default]
OSInstall=Y
ScanStateArgs=/v:5 /o /c
LoadStateArgs=/v:5 /c /lac /lae
UDShare=\\SERVER1\UserStateCapture$
UDDir=%COMPUTERNAME%
USMTMigFiles1=MigApp.xml
USMTMigFiles2=MigUser.xml
USMTMigFiles3=MigSys.xml
UserDataLocation=NETWORK


SkipAppsOnUpgrade=YES
SkipCapture=NO
SkipAdminPassword=YES
SkipProductKey=YES


Does anyone have any suggestions?
unknown
2008-11-14 04:05:43 UTC
Permalink
Did you add InstallUSMT301_x86.msi to your Distribution\Tools\X86
fodler?

Regards

Johan Arwidmark
Microsoft MVP - Setup / Deployment
http://www.deployvista.com


On Thu, 13 Nov 2008 18:02:31 -0500, "shon"
Post by shon
I'm using this scenario in a virtual environment but keep getting the
<![LOG[About to run command: msiexec.exe /i
"\\SERVER1\Distribution$\Tools\X86\InstallUSMT301_X86.msi" /quiet /passive
/norestart /L*v %TEMP%\USMT301.log]LOG]!><time="17:54:01.000+000"
date="11-13-2008" component="ZTIUserState" context="" type="1" thread=""
file="ZTIUserState">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIUserState: The system
cannot find the file specified.
(-2147024894 0x80070002)]LOG]!><time="17:54:01.000+000" date="11-13-2008"
component="ZTIUserState" context="" type="3" thread="" file="ZTIUserState">
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
ScanStateArgs=/v:5 /o /c
LoadStateArgs=/v:5 /c /lac /lae
UDShare=\\SERVER1\UserStateCapture$
UDDir=%COMPUTERNAME%
USMTMigFiles1=MigApp.xml
USMTMigFiles2=MigUser.xml
USMTMigFiles3=MigSys.xml
UserDataLocation=NETWORK
SkipAppsOnUpgrade=YES
SkipCapture=NO
SkipAdminPassword=YES
SkipProductKey=YES
Does anyone have any suggestions?
shon
2008-11-14 17:46:12 UTC
Permalink
Yes, it's installed in the Distribution\Tools\X86 folder.

Any other suggestions? Thanks
Post by unknown
Did you add InstallUSMT301_x86.msi to your Distribution\Tools\X86
fodler?
Regards
Johan Arwidmark
Microsoft MVP - Setup / Deployment
http://www.deployvista.com
On Thu, 13 Nov 2008 18:02:31 -0500, "shon"
Post by shon
I'm using this scenario in a virtual environment but keep getting the
<![LOG[About to run command: msiexec.exe /i
"\\SERVER1\Distribution$\Tools\X86\InstallUSMT301_X86.msi" /quiet /passive
/norestart /L*v %TEMP%\USMT301.log]LOG]!><time="17:54:01.000+000"
date="11-13-2008" component="ZTIUserState" context="" type="1" thread=""
file="ZTIUserState">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIUserState: The system
cannot find the file specified.
(-2147024894 0x80070002)]LOG]!><time="17:54:01.000+000"
date="11-13-2008"
component="ZTIUserState" context="" type="3" thread=""
file="ZTIUserState">
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
ScanStateArgs=/v:5 /o /c
LoadStateArgs=/v:5 /c /lac /lae
UDShare=\\SERVER1\UserStateCapture$
UDDir=%COMPUTERNAME%
USMTMigFiles1=MigApp.xml
USMTMigFiles2=MigUser.xml
USMTMigFiles3=MigSys.xml
UserDataLocation=NETWORK
SkipAppsOnUpgrade=YES
SkipCapture=NO
SkipAdminPassword=YES
SkipProductKey=YES
Does anyone have any suggestions?
unknown
2008-11-16 16:52:48 UTC
Permalink
Hi,

Installed? Is the InstallUSMT301_x86.msi file present in the
Distribution\Tools\X86 folder?

And since you are only using the default templates, you don't have to
specify the USMTMigFiles1,2,3 entries in cs.ini

Regards

Johan Arwidmark
Microsoft MVP - Setup / Deployment
http://www.deployvista.com


On Fri, 14 Nov 2008 12:46:12 -0500, "shon"
Post by shon
Yes, it's installed in the Distribution\Tools\X86 folder.
Any other suggestions? Thanks
Post by unknown
Did you add InstallUSMT301_x86.msi to your Distribution\Tools\X86
fodler?
Regards
Johan Arwidmark
Microsoft MVP - Setup / Deployment
http://www.deployvista.com
On Thu, 13 Nov 2008 18:02:31 -0500, "shon"
Post by shon
I'm using this scenario in a virtual environment but keep getting the
<![LOG[About to run command: msiexec.exe /i
"\\SERVER1\Distribution$\Tools\X86\InstallUSMT301_X86.msi" /quiet /passive
/norestart /L*v %TEMP%\USMT301.log]LOG]!><time="17:54:01.000+000"
date="11-13-2008" component="ZTIUserState" context="" type="1" thread=""
file="ZTIUserState">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIUserState: The system
cannot find the file specified.
(-2147024894 0x80070002)]LOG]!><time="17:54:01.000+000"
date="11-13-2008"
component="ZTIUserState" context="" type="3" thread=""
file="ZTIUserState">
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
ScanStateArgs=/v:5 /o /c
LoadStateArgs=/v:5 /c /lac /lae
UDShare=\\SERVER1\UserStateCapture$
UDDir=%COMPUTERNAME%
USMTMigFiles1=MigApp.xml
USMTMigFiles2=MigUser.xml
USMTMigFiles3=MigSys.xml
UserDataLocation=NETWORK
SkipAppsOnUpgrade=YES
SkipCapture=NO
SkipAdminPassword=YES
SkipProductKey=YES
Does anyone have any suggestions?
Loading...